|Induction PWHT Machine
|40kw, 80kw, 120kw
|PWHT/Post Weld Heat Treatment
|Welding Preheat, Anti-corrosion Coating, Etc
|ISO, CE, Etc
Anti Corrosion Coating Preheat PWHT Machine,
Gas Pipeline Joint Induction Heating Machine,
welding preheat Induction Heating Machine
High Quality CE ISO Induction PWHT Machine for Flange
Brief introduction of Canroon high quality CE ISO induction PWHT machine for flange:
Induction heating technology is suitable for pipeline anticorrosion and pipeline coating process implementation,
which can not only greatly improve the production efficiency,but also achieve the best in technical indicators
such as temperature uniformity.
Rugged,fast operating clamp coils.
Rapid heating,uniform temperature.
Installation,connection and operation can be completed quickly to meet the urgent requirements of the site.
High efficiency and quick heating with low loss of generator and coil.
High reliability ensures continuous uninterrupted operation.
Induction heaitng equipment is designed and manufactured by Canroon used for pipes PWHT/post weld
heat treatment(DHT dehydrogenation heat treatment, ISR intermediate stress relief), widely applied and
welcomed by oil&gas piping,offshore platform construction, and power plant construction & repair.
We have portable type with 5kw, 10kw, for movable type, we have 40kw, 80kw, 120kw. For 40kw induction heating
equipment applied in PWHT, the suitable pipe size with Diameter of 200-1600mm and Thickness of 25-120mm,
heating temperature will reach 788℃ at most. It can heat both carbon steel pipes and stainless steel pipes.
Besides, application of welding preheat, joint anti-corrosion coating and shrink fitting are also very efficient.
Overall pictures of Canroon high quality CE ISO induction PWHT machine for flange:
Canroon induction heating equipment is designed and manufactured with high quality materials, it has
beautiful outlook, universal wheels for high movability, temperature recorder for precise control, display
panel to show working details, six thermocouple connections to record the temperatures, and remotecontrol
for working site accordingly.
Technical parameters of high quality CE ISO induction PWHT machine for flange:
Duty Cycle: 100%
Application details of high quality CE ISO induction PWHT machine for flange:
Induction heating machine with temperature recorder for pipe PWHT/post weld heat treatment works very well,
from the temperature feedback from thermocouple, we can see it is fast and uniform heating, insulation blanket
can keep heat, and the induction cable windings can be set according to your pipe, heating temperature, etc.
Following is picture of the detailed working site.
Features of high quality CE ISO induction PWHT machine for flange:
- Friendly Interface and Accurate Control
The control board offers various parameters for setting so the heating process can be controlled precisely
by giving value to temperature, time, heating rate, cooling rate, etc.
- Various Control Mode
The interface offers two basic control mode to choose including temperature control and power control.
The former one has 4 modes of preheat, bake-out, PWHT, custom. The last one has 2 modes ofconstant
power and power VS time. Each mode offers different parameters to set. Thus brings the benefit of wide
applicability and precise control.
- Fault Record
Fault codes will display and be recorded for reference, and system will respond with protection action like
shutdown once fault occurs such as open-loop output or short out.
- Easy Maintenenace
Due to modular design, the maintance will be easy and low-cost.
- Self Diagnosis
Once fault occurs, CR2000 will act with display of fault code, which was detailed explained in the manual book.
- High Efficiency
This uniquely energy-efficient process converts up to 90% of the expended energy into useful heat, and
time-to-temperature is faster than conventional processes due to the method of applying heat, reducing cycle time.
- Uniform Heating
The heat is induced within the part itself by alternating electrical current, thus uniform temperature throughout the
heating zone is realized.
- Replaceable Heating Inductor
Apart from induction blanket (blanket type inductor), there are multiple heating inductors for choice including induction
coil/cable, C-type inductor, plate type inductor, Split-core inductor, O type inductor, all of which are easily dismountable
and reconnected to the power source. So the power source can be used for heating workpiece of different size and shape.
Accessories of high quality CE ISO induction PWHT machine for flange:
We offer multiple accessaries like thermocouple, thermocouple welding machine, digital temperature-recorder,
remote switchgear, output extension cable, insulation blanket, etc. Complete solution saves your time andensures
you to start work soon after received our delivery.