|Place of Origin:||Shenzhen, China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||within 5 days if available in stock|
|Payment Terms:||T/T, L/C, Western Union, MoneyGram|
|Supply Ability:||500 sets per month|
|Relative Humidity:||Less Than 90%RH, No Condensation||Power:||8kw|
|Overload Protection:||120% Per Minute 150% Instant Protection||Startup Time:||< 0.2S|
|Electro-thermal Conversion:||> 95%||Effective Power:||> 85%|
|The Service Life:||> 50000Hrs||Protection Detection:||< 10μS|
40KW Industrial Heat System,
Cast Iron Melting Induction Heating MachineInduction Heating Machine
Induction heating machine 40KW for cast iron melting electric magnetic power supply
CR1300 series is mainly used in all kinds of plastic machinery (such as: injection molding machine, extruder, pelletizer,
film blowing machine, wire drawing machine energy-saving transformation), chemical fiber equipment, food and medicine
machinery, steam and hot air preparation and other industries.
Quick Detail Induction heating machine 40KW for cast iron melting electric magnetic power supply
Place of Origin:China (Mainland)
Power : 10kw
Voltage : 3-phase 380-460V
startup time :< 0.2S
Electro-thermal conversion : > 95%
Effective power :> 85%
Usage : Industrial Heat System
Storage temperature :-30℃～+60℃
Overload protection :120% per minute 150% instant protection
Main functions of Induction heating machine 40KW for cast iron melting electric magnetic power supply
1.Start mode is optional
Remote boot (external terminal boot and 24V pulse boot), keyboard boot.
2.Perfect protection function
Overheat, overvoltage, undervoltage, lack of phase, overcurrent (including hardware overcurrent protection,
software overcurrent protection, VCE protection) and other protection, and temperature sensor fault detection function
3.Load inductance detection function
Can measure the size of the load inductance, when the inductance is too large or too small, alarm and start the
corresponding protection function.
4.Various heating modes
Maximum power heating, curve heating, twenty section heating, analog amount (0 ~ 10V /4 ~ 20mA) control
heating and other heating modes
5.Run limited function
The limited run time can be set as required.
6.Parameter storage function
Instant storage of fault information; Power consumption, accumulated running time and so on are stored every 2 hours.
7.External fault signal input and local fault signal output.
Curve heating mode:
Set the heating mode (F008) as 1, that is, set the curve heating mode. The initial power (F023) and heating time (F022)
of the curve can be set to make it heat according to the predetermined curve.
Curve heating mode can set the curve heating time and starting power. Curve heating time is the time from starting power to
the maximum power. The power increases with the slope as a multiple of the maximum power/starting power. When the
maximum power is reached, the heat is heated at the maximum power. The curve heating model is shown in the figure below:
4 ~ 20mA control mode:
Set the heating mode (F008) as 4, that is, set the mode of 4 ~ 20mA. At this time, the output power can be adjusted
by the input current value of the analog quantity.
0 ~ 10V control mode:
Set the heating mode (F008) as 3, that is, set the control mode of 0 ~ 10V. At this time, the output power can be
adjusted by the input voltage value of the analog quantity.
Technical parameters of Induction heating machine 40KW for cast iron melting electric magnetic power supply
Application details of Induction heating machine 40KW for cast iron melting electric magnetic power supply